Skip to content
REMINDER: During the shut downs for COVD-19 we are staying open and doing increased home deliveries to ensure our community has the equipment they need.
REMINDER: During the shut downs for COVD-19 we are staying open and doing increased home deliveries to ensure our community has the equipment they need.

Lightweight Expedition with 12" Rear Wheels

$248.00
SKU
Color: Blue

With 12" rear wheels to improve maneuverability across uneven terrain, the Expedition offers safety, versatility, and easy transport at a low price.

Features
  • Weight Capacity: 300 lbs
  • Attendant operated hand brakes
  • Nylon upholstery is durable and easy to clean
  • Our lightest weight transport chair with 12" rear wheels
  • Available in red and blue
  • Folds flat for easy transport
Key Specs
  • Overall Width - Folded: 10.75"
  • Quick-Release Axles: No
  • Weight capacity: 300 lbs.
  • Weight: 19 lbs.
Overview

Drive Medical's Lightweight Expedition with 12" Rear Wheels is great for shopping trips, doctor's appointments and sightseeing. The large 12" rear wheels are flat free which enables the chair to be used outdoors. The Lightweight Expedition has a lever on the backrest to fold it down for transport and caregiver operated locks on the handles. Additional standard features include padded fixed armrests, removable swing-away footrests and a durable aluminum frame. This wheelchair's purpose is for occasional use. 

What You Need to Know When Ordering

This wheelchair's purpose is for occasional use. While the seat width is 19 inches, because of the permanent armrests the access to the seat is 17 inches getting into the chair and 19 inches when already seated. 

Measuring Guide


Seat Depth1
Measure from the most posterior point of the body to the inside of the knee, minus at least two inches. Some prefer more leg overhang to make room for their hand when lifting their leg.
Back Height2
Measured from the seat base to the top of the wheelchair back. Depends on how much upper back support is needed, and also affects freedom for the upper body to rotate.
Rear Seat to Floor3
Measurement from the ground to the rear seat edge. Relative to the front seat-to-floor dimension, this determines the rearward slope ("dump" or "squeeze") of the wheelchair seat.
Hanger Angle4
Determines how far the toes extend away from the body, measured from the horizontal. A tighter angle allows the wheelchair to turn around in less space. Depends in part on ability of the knee to bend towards the perpendicular.
Seat Width5
Determined by the widest point of the body from knee to hip, plus an inch to ensure room to move. Consider bulk of clothing, particularly a heavy winter coat, if relevant.
Wheel Camber6
Angle of the wheel relative to the vertical. More camber improves stability and agility, but also limits ability to pass through narrow spaces. A typical daily wheelchair uses three degrees of camber.
Front Seat to Floor7
Measure the leg from the back of the knee to the sole of the foot. Then subtract the thickness of the cushion when it is compressed. Next, add a minimum of two inches for footrest clearance. Do not add the footrest clearance if the wheelchair will be foot-propelled.
Footrest Width8
Measure from the inside of each legrest tubing the distance or desired distance between legrests.
Center of Gravity9
Measure from the front of the seat back post to the center of the rear axel.
Seat to Footrest Length10
Measure from the edge of the seat upholstery to the top rear of the footrest.
Backrest Angle11
Measure the the angle of the back post to the floor. Ninety degrees will be perpendicular to the floor, to approximate the angle from the back post to the seat, subtract two degrees from measurment for every .5" of dump.